Відео

What is the oil capacity in the monoshock ?

Does this fix 5k rattle

Thank you so much!

How to turn it off

Awesome video!! I broke my top speed record the other day with my XR150L at 88mph.😁

Notably absent is the procedure for removing the Tupperware.

Tenho uma klr 250 . Bateu segmentos. Antes de mandar abrir queria ajuda em saber a referência dos segmentos

Pull the flywheel. Likely rusty from condensation. Replace the stator if still weak. Can't always rely on ohm values. Peak voltage would be a more accurate test. Don't buy the electrosport stator.

Awesome! Thank you.

It comes right of, that one made me giggle! Thanks worked well!

Kratko i jasno !!!

Thanks about the reverse thread no wonder I was getting confused about this. I was like what the s going on with this!!😂

Have a squeak only when moving bike around in garage after riding.. doesn't happen when bike is cold...I will try this

Thanks a TON for posting this. This squeak drove me crazy. During the install of a new shock, I chased this squeak and ended up removing and repacking the bearings in the swingarm and the linkages, trying to make it go away... turns out I was headed in the wrong direction.

Why did you remove the engine?

1:50 Hey all you longtime bike riders out there ,look at the clutch cable lock nuts, why would Honda decide to do it this way on this model only? We all know it is incorrect, but it is shown in the manual this way also. The threads on mine were starting to wear off until I fixed it.

I was a Honda motorcycle mechanic for 30 years .. If you don't have the pocket tester why don't you use the MIL tool to read the DTC codes ..

Remember, lower the back then lower the front. Keeps the geometry correct. See altrider at 7:58 ua-cam.com/video/A05ah-lR6mo/v-deo.htmlsi=vJtesdpT39_R0xyq

What’s the mirror model name

Starterul influențează incarcarea bateriei?

thank you!

What kind of oil did you use to lube it?

my front fork is mangled and needs repairing or replacing.

Hi. how many newtons do you tighten the lower bolt?

Cool explanation.

Hawk tuah spit on that thang

Thank you !! excellent and simple video to explain the differences between right and left mirrors. Bernard (France)

When i pulled the oil drain plug on my KVF650 like a whole gallon of gas poured out so im gonna replace the fuel needles but is there anything else i need to? Check like maybe that plastic fuel pump?

Maybe you can help me 2014 Honda FROZA 300 will not start pushing the Starter button, but when you jump the solenoid, the motor would start up and runs fine. This problem was it intermittent for a while, but now it doesn’t start at all. I have to continuously lift the seat up and jump the starter. I have power to the ignition switch all the way down to the solenoid. Also, the kickstand has to be up and the break has to be held to start. Any ideas would help Rob.

2017 Yz250f with 110 hours Just blew 5th gear, shifted without the clutch.

Help, I can't manage to screw out the allen under the fork without the smaller spring inside the forks rotating with it.. I tried lodging a screwdriver in to hold it in place, but to no avail.. The whole assembly on the bottom is just rotating with it (I guess it's because of the sticky threads)

This is a great video. I bought one of those tools to remove the front wheel bearings off my 1972 CB750. I figured I’d go with this style bearing puller as the slide hammer seems a bit violent…especially on other applications such as engine cases etc.. In fact I was a bit confused at how the puller did the job since there were so many nuts to tighten, I ended up doing exactly what you said most people end up doing. So glad I watched your video. Thank you.

Hi, just wondering what the torque spec is for the clutch spring bolts? My 21 model is slipping badly but can’t find torque specs anywhere.

How much oil do you use?

I have a tdm 900 with the stock tensioner still installed. I want to replace it with a new one. Can I just bold the old one of and place the new one?

Only video I could find on this style head thank you !!

Thanks for the info.

Hello Cyclepedia I also have a broken inner fender and need to remove the helmet lock to replace it. I also need to order a new bolt. What tool can I use to lock this?

just purchased a 2022 RM85 for my son VIA FB marketplace and forgot to check the oil drain plug not thinking anything. The guy put some sort of epoxy crap all over the drain bolt plug and I cannot get it off. It leaks oil through this epoxy so I bet he cracked it or cross threaded it. Either way a very bad move to make by putting epoxy on it and he hid it from me obviously.

How can I tell if the rocker arms are no good?

Konsi gadi ka hai

I purchased the repair manual and much more in depth w/ pictures to detail. Repair manual covers it all. Worth the purchase. 💯

I have a 2013 are the codes the same? Mine is stuck in reverse and the R blinks 2 slow 2 fast.

Are you going to ride it or not?

mejor explicado que el manual de taller y digo mejor porque diste algunos tips mas

Где искать запчасти

Genius

Do u have to make sure the engine is at tdc before you take it out and reset it buddy

Probably the worst clutch change I’ve ever had to do I spent the last two days scrambling to get it done

Fr doe